|Landscaping & Energy
Are you looking for cost-effective yet
eye-pleasing ways to lower your energy bills? Planting trees, shrubs, vines,
grasses, and hedges could be the answer. In fact, landscaping may be your best
long-term investment for reducing heating and cooling costs, while also bringing
other improvements to your community.
A well-designed landscape will:
- Cut your summer and winter energy costs
- Protect your home from winter wind and summer
- Reduce consumption of water, pesticides, and
fuel for landscaping and lawn maintenance.
- Help control noise and air pollution.
Landscaping Saves Money Year-Round
Carefully positioned trees can save up to 25% of
a household's energy consumption for heating and cooling. Computer models
devised by the U.S. Department of Energy predict that the proper placement of
only three trees will save an average household between $100 and $250 in energy
On average, a well-designed landscape provides
enough energy savings to return your initial investment in less than 8 years. An
8-foot (2.4-meter) deciduous (leaf-shedding) tree, for example, costs about as
much as an awning for one large window and can ultimately save your household
hundreds of dollars in reduced cooling costs, yet still admit some winter
sunshine to reduce heating and lighting costs. Landscaping can save you money in
summer or winter.
You may have noticed the coolness of parks and wooded areas compared to the
temperature of nearby city streets. Shading and evapotranspiration (the process
by which a plant actively moves and releases water vapor) from trees can reduce
surrounding air temperatures as much as 9 degrees F (5 degrees C). Because cool
air settles near the ground, air temperatures directly under trees can be as
much as 25 degrees F (14 degrees C) cooler than air temperatures above nearby
blacktop. Studies by the Lawrence Berkeley Laboratory found summer daytime air
temperatures to be 3 degrees F to 6 degrees F (2 degrees C to 3 degrees C)
cooler in tree- shaded neighborhoods than in treeless areas.
A well-planned landscape can reduce an unshaded
home's summer air-conditioning costs by 15% to 50%. One Pennsylvania study
reported air-conditioning savings of as much as 75% for small mobile homes.
You may be familiar with wind chill. If the outside temperature is 10 degrees F
(-12 degrees C) and the wind speed is 20 miles per hour (32 kilometers per
hour), the wind chill is -24 degrees F (-31 degrees C). Trees, fences, or
geographical features can be used as windbreaks to shield your house from the
A study in South Dakota found that windbreaks to
the north, west, and east of houses cut fuel consumption by an average of 40%.
Houses with windbreaks placed only on the windward side (the side from which the
wind is coming) averaged 25% less fuel consumption than similar but unprotected
homes. If you live in a windy climate, your well-planned landscape can reduce
your winter heating bills by approximately one-third.
Landscaping for a Cleaner Environment
Widespread tree planting and climate-appropriate
landscaping offer substantial environmental benefits. Trees and vegetation
control erosion, protect water supplies, provide food, create habitat for
wildlife, and clean the air by absorbing carbon dioxide and releasing oxygen.
The National Academy of Sciences (NAS) estimates
that urban America has 100 million potential tree spaces (i.e., spaces where
trees could be planted). NAS further estimates that filling these spaces with
trees and lightening the color of dark, urban surfaces would result in annual
energy savings of 50 billion kilowatt-hours—25% of the 200 billion
kilowatt-hours consumed every year by air conditioners in the United States.
This would reduce electric power plant emissions of carbon dioxide by 35 million
tons (32 million metric tons) annually and save users of utility-supplied
electricity $3.5 billion each year (assuming an average of $0.07 per
Also, some species of trees, bushes, and grasses
require less water than others. Some species are naturally more resistant to
pests, so they require less pesticides. Another alternative to pesticides is
integrated pest management, an emerging field that uses least-toxic pest
control strategies. One example is to introduce certain insects such as praying
mantises or ladybugs to feed on—and limit populations of—landscape-consuming
Certain grasses, such as buffalo grass and
fescue, only grow to a certain height—roughly 6 inches (15 centimeters) and
are water thrifty. By using these species, you can eliminate the fuel, water,
and time consumption associated with lawn mowing, watering, and trimming. Also,
recent studies have found that gasoline-powered mowers, edge trimmers, and leaf
blowers contribute to air pollution.
Climate, Site, and Design Considerations
The United States can be divided into four approximate climatic regions:
temperate, hot-arid, hot-humid, and cool. The energy-conserving landscape
strategies you use should depend on which region you live in. These landscaping
strategies are listed by region and in order of importance below.
- Maximize warming effects of the sun in the
- Maximize shade during the summer.
- Deflect winter winds away from buildings.
- Funnel summer breezes toward the home.
- Provide shade to cool roofs, walls, and
- Allow summer winds to access naturally cooled
- Block or deflect winds away from
- Channel summer breezes toward the home.
- Maximize summer shade with trees that still
allow penetration of low-angle winter sun.
- Avoid locating planting beds close to the home
if they require frequent watering.
- Use dense windbreaks to protect the home from
cold winter winds.
- Allow the winter sun to reach south-facing
- Shade south and west windows and walls from
the direct summer sun, if summer overheating is a problem.
The climate immediately surrounding your home is
called its microclimate. If your home is located on a sunny southern slope, it
may have a warm microclimate, even if you live in a cool region. Or, even though
you live in a hot-humid region, your home may be situated in a comfortable
microclimate because of abundant shade and dry breezes. Nearby bodies of water
may increase your site's humidity or decrease its air temperature.
Your home's microclimate may be more sunny,
shady, windy, calm, rainy, snowy, moist, or dry than average local conditions.
These factors all help determine what plants may or may not grow in your
Sitting and Design
A well-oriented and well-designed home admits low-angle winter sun, rejects
overhead summer sun, and minimizes the cooling effect of winter winds. If you
are building a home, pay attention to its orientation.
In the northern hemisphere, it is usually best to
align the home's long axis in an east-west direction. The home's longest wall
with the most window area should face south or southeast. The home's
north-facing and west-facing walls should have fewer windows because these walls
generally face winter's prevailing winds. North-facing windows receive little
You may be able to design and orient your new
house to maximize your home site's natural advantages and mitigate its
disadvantages. Notice your home site's exposure to sun, wind, and water. Also
note the location and proximity of nearby buildings, fences, water bodies,
trees, and pavement -- and their possible climatic effects. Buildings provide
shade and windbreak. Fences and walls block or channel the wind. Water bodies
moderate temperature but increase humidity and produce glare. Trees provide
shade, windbreaks, or wind channels. Pavement reflects or absorbs heat,
depending on whether its color is light or dark.
If your home is already built, inventory its
comfort and energy problems, then use the following landscaping ideas to help
minimize these problems.
Solar heat passing through windows and being absorbed through the roof is the
major reason for air-conditioner use. Shading is the most cost-effective way to
reduce solar heat gain and cut air-conditioning costs. Using shade effectively
requires you to know the size, shape, and location of the moving shadow that
your shading device casts. Remember that homes in cool regions may never
overheat and may not require shading.
Trees can be selected with appropriate sizes,
densities, and shapes for almost any shading application. To block solar heat in
the summer but let much of it in during the winter, use deciduous trees. To
provide continuous shade or to block heavy winds, use evergreen trees or shrubs.
Deciduous trees with high, spreading crowns
(i.e., leaves and branches) can be planted to the south of your home to provide
maximum summertime roof shading. Trees with crowns lower to the ground are more
appropriate to the west, where shade is needed from lower afternoon sun angles.
Trees should not be planted on the southern sides of solar- heated homes in cold
climates because the branches of these deciduous trees will block some winter
A 6-foot to 8-foot (1.8-meter to 2.4-meter)
deciduous tree planted near your home will begin shading windows the first year.
Depending on the species and the home, the tree will shade the roof in 5 to 10
years. If you have an air conditioner, be aware that shading the unit can
increase its efficiency by as much as 10%.
Trees, shrubs, and groundcover plants can also
shade the ground and pavement around the home. This reduces heat radiation and
cools the air before it reaches your home's walls and windows. Use a large bush
or row of shrubs to shade a patio or driveway. Plant a hedge to shade a
sidewalk. Build a trellis for climbing vines to shade a patio area.
Vines can shade walls during their first growing
season. A lattice or trellis with climbing vines, or a planter box with trailing
vines, shades the home's perimeter while admitting cooling breezes to the shaded
Shrubs planted close to the house will fill in
rapidly and begin shading walls and windows within a few years. However, avoid
allowing dense foliage to grow immediately next to a home where wetness or
continual humidity are problems. Well-landscaped homes in wet areas allow winds
to flow around the home, keeping the home and its surrounding soil reasonably
Properly selected and placed landscaping can provide excellent wind protection,
which will reduce heating costs considerably. Furthermore, these benefits will
increase as the trees and shrubs mature. The best windbreaks block wind close to
the ground by using trees and shrubs that have low crowns.
Evergreen trees and shrubs planted to the north
and northwest of the home are the most common type of windbreak. Trees, bushes,
and shrubs are often planted together to block or impede wind from ground level
to the treetops. Or, evergreen trees combined with a wall, fence, or earth berm
(natural or man-made walls or raised areas of soil) can deflect or lift the wind
over the home. Be careful not to plant evergreens too close to your home's south
side if you are counting on warmth from the winter sun.
A windbreak will reduce wind speed for a distance
of as much as 30 times the windbreak's height. But for maximum protection, plant
your windbreak at a distance from your home of two to five times the mature
height of the trees.
If snow tends to drift in your area, plant low
shrubs on the windward side of your windbreak. The shrubs will trap snow before
it blows next to your home.
In addition to more distant windbreaks, planting
shrubs, bushes, and vines next to your house creates dead air spaces that
insulate your home in both winter and summer. Plant so there will be at least 1
foot (30 centimeters) of space between full-grown plants and your home's wall.
Summer winds especially at night can have a
cooling effect if used for home ventilation. However, if winds are hot and your
home is air conditioned all summer, you may want to keep summer winds from
circulating near your home.
Planning Your Landscape
Before you start landscaping, you must first
develop a plan. The components of your plan could include deciduous trees and
plants, coniferous trees and plants, earth berms, walls, fences, sheds, and
garages. This section will help you create a landscape plan before you plant
around your existing home or before you begin construction on a new house.
Use paper and different-colored pencils to begin
designing your landscape. First, sketch a simple, scaled drawing of your yard.
Locate its buildings, walks, driveways, and utilities (e.g., sewer, electric,
and telephone lines). Note the location of all paved surfaces—streets,
driveways, patios, or sidewalks—near your home. Then identify potential uses
for different areas of your yard: vegetable gardens, flower beds, patios, and
Draw arrows to show sun angles and prevailing
winds for both summer and winter. As you sketch, circle the areas of your yard
needing shade or wind protection.
Indicate with arrows how you want views to be
preserved or screened. Mark routes of noise pollution you wish to block. Also,
highlight areas where landscaping height or width may be restricted, such as
under utility lines or along sidewalks.
Notice yard areas that suffer from poor drainage
and standing water. Some trees and shrubs will not grow well in poorly drained
areas; others will. Note existing trees and shrubs. Plan for their replacement
if they are old or sick and if they provide valued shade or windbreak.
Perhaps you want more defined property boundaries
or less traffic noise. Consider a "living fence" of dense trees,
bushes, or shrubs. Depending on its location and application, this hedge can be
customized to be tall, short, wide, narrow, open, or dense. Privet is a species
of shrub that grows in most parts of the United States and can serve as a living
Areas of lawn not used as picnic or play areas
can be converted to planting beds or xeriscaped areas. Xeriscaping is a
landscaping technique that uses vegetation that is drought resistant and is able
to survive on rainfall and groundwater once established. Converting a
traditional lawn to alternative, water-conserving grasses or other forms of
xeriscaping saves energy and reduces water consumption.
Perhaps you live in an urban area where yards are
small and neighbors close. Your neighbor's yard may be the best place for trees
to shade your south-facing windows. Your yard may be the best location for their
windbreak. Bringing your neighbors into your plans could benefit everyone
The more you identify your goals and familiarize
yourself with your yard's features—current and proposed—the better your
chances for success with your landscaping projects.
Selecting and Planting Trees and Shrubs
Trees and shrubs come in all shapes and sizes.
How you select your trees and shrubs and how you plant them will directly affect
your home's comfort and energy efficiency. You can get information on regionally
appropriate species from your local nursery and landscaping experts.
Trees and shrubs have a life span of many years
and can become more attractive and functional with age. But poor planning of
landscape improvements often creates trouble. Ensure proper plant placement and
minimal maintenance before you plant!
Tree shapes are very diverse think of the difference in shape between an oak and
a spruce. The "Shading" section under "Climate, Site, and Design
Considerations" above discusses how to use varying tree and shrub
characteristics to maximum advantage when landscaping.
The density of a tree's leaves or needles is
important to consider. Dense evergreens, like spruces, make great windbreaks for
winter winds. If you are just looking to impede summer winds, choose a tree or
shrub with more open branches and leaves. Such trees are also good for filtering
morning sun from the east, while denser trees are better for blocking harsh
afternoon summer sun.
Should you plant slow-growing or fast-growing tree species? Although a
slow-growing tree may require many years of growth before it shades your roof,
it will generally live longer than a fast-growing tree. Also, because
slow-growing trees often have deeper roots and stronger branches, they are less
prone to breakage by windstorms or heavy snow loads. And they can be more
drought resistant than fast-growing trees.
Consider growth rate, strength, and brittleness
when locating trees near walkways or structures. Ask whether the mature tree's
root system is likely to damage sidewalks, foundations, or sewer lines. The
smaller your yard, the more important it is to select a tree with manageable
Selecting, Final Planning, and Purchasing
Landscape professionals can help you choose and locate new trees, shrubs, or
ground cover. Share your drawings and tentative ideas with your local nursery or
landscape contractor. As long as you have defined intended uses and spaces in
which planting is actually possible, a competent nursery or landscape specialist
will be able to help you make decisions.
When planting trees, shrubs, hedges, or bushes,
find out how large the mature specimen will grow. In all cases, determine
spacing by the mature sizes. For those plants close to your house, plan
for at least 1 foot (30 centimeters) of extra clearance between the full-grown
shrub and the wall of the home. This will prevent heavy pruning or damage to
home siding in the future.
After considering the placement of your trees and
consulting landscaping and nursery professionals, go back to your drawings or
plans and add the new information on species, shape, and mature-size spacing.
This provides a final, pre-purchase review to make sure that all elements will
work well together—in the short and long term.
When you are ready to purchase your trees and
shrubs, avoid buying damaged specimens. Thoroughly inspect the bark, limbs, and
roots to make sure the plant was handled carefully during growing, digging, and
shipping. Reject plant stock with signs of insects or disease (cocoons, egg
masses, cankers, or lesions).
After you purchase the plants, be sure to keep
tiny root hairs damp and shaded at all times. The plants will not survive if
these root hairs are allowed to dry before planting.
Contact your county extension agents, public
libraries, local nurseries, landscape architects, landscape contractors, and
state and local energy offices for additional information on regionally
appropriate plants and their maintenance requirements.